Toyota FJ Cruiser Wiper Blade Size Chart (2007 – 2022)

What is the most important safety feature in your Toyota FJ Cruiser? This is a very difficult question to answer because this vehicle comes with an array of very important safety features. One we can bet you didn’t think of are the wiper blades. Nine times out of ten, no one would so there’s no need to beat yourself up.

What many drivers like yourself don’t realize is that these simple pieces can be the difference when caught out in a storm. Without your wiper blades, you would have to drive at a snail’s pace or park your vehicle in such a situation. Wiper blades help to rid your windshield of rainwater, ice, snow, and dirt to improve visibility.

One thing you must know about wiper blades is that they don’t last forever. In fact, you shouldn’t use them beyond six months if you use them daily. At most, they can last up to ten months without daily use. When changing your wiper blades, you need to watch out for the right size. Getting the wrong wiper blade size will result in a waste of funds and damage.

toyota fj cruiser wiper blade size

To this end, we have put together a chart showing the wiper blade sizes for all Toyota FJ Cruiser models. Check out this chart below:

2014 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

2013 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

2012 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

2011 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

2010 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

2009 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

2008 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

2007 Toyota FJ Cruiser Wiper Blade Size

  • Driver’s side: 16, inches
  • Passenger side: 13/14 inches

Tips to Extend your Wiper Blades’ Life

Not many drivers put thought into caring for their windshield wiper blades. These features are arguably one of the least cared for on any vehicle despite being so vital. Most drivers don’t even know when their wiper blades need a change. They only figure this out when caught in a storm or blizzard and their wiper blades aren’t functioning optimally.

As we mentioned earlier, windshield wipers need replacement at least twice every year. However, you can extend your wiper blades’ life span by carrying out certain simple processes. We will show you some of these processes in this section.

Keep the blades clean

When last did your clean your windshield wiper blades? You probably can’t remember except if you count washing your car as cleaning your wipers. Well, they are not the same thing because you don’t concentrate your efforts on cleaning the blades.

It is time to clean your wiper blades once you notice that they are leaving streaks on the windshield. Cleaning your windshield wipers is a very simple process. All you need is a clean towel and some rubbing alcohol. The steps below will guide you:

Step 1: Lift the wiper blades off the windshield gently until they snap in place.

Step 2: Dip the clean towel in some rubbing alcohol.

Step 3: Wipe the blades from one end to another in a back and forth motion.

Step 4: Use a clean towel to clean the wiper blades afterward.

Step 5: Drop the wiper blades back to their natural position on the windshield gently.

Doing this helps to prevent dirt or debris build-up on your wiper blades. Leaving them without cleaning will not only cause streaks but could also scratch your windshield. Note that you should also clean your windshield frequently with clean water or glass cleaner and a clean towel.

Check the rubber

The rubber on your wiper blade covers a thin metal sheet. After a while, this metal sheet is exposed due to wear and tear. At this point, you begin to hear an unpleasant screeching or squeaking sound every time your wipers are in use. This sound means that it is time to replace your wiper blades. Not replacing them will result in the wiper blades scratching the windshield leading to irreparable damage.

Ensure that you check your wipers frequently to be sure that there is no breakage or splitting that exposes the metal. If the blades are worn, torn, hardened, or cracked, we suggest that you replace them.

Clear the ice

This maintenance procedure is important if you reside in the temperate region. It is no secret that snowing is a frequent occurrence in this part of the world. When it snows and you leave your wiper blades on the windshield, the ice freezes the wiper blades. Also, the ice gets into the crevices on the wiper arm.

One may be tempted to use the wiper blades like this, after all, switching them on will break the ice. While this is true, it will also damage the wiper blades or your windshield. Using frozen wiper blades scratches the windshield and also causes the blades to wear quickly.

We suggest that you switch on your car’s defroster first to warm the windshield. After doing this, you can remove the ice or snow with a plastic scraper. When you complete this process, your wiper blades are ready for use.

Refill the washer fluid

Your wiper blades were not designed for use on a dry windshield. However, the temptation to use them this way arises when you see some dirt on your windshield that you need to remove quickly. Don’t fall to this temptation, instead, squirt some washer fluid on the windshield first before turning on your wipers.

This is why you must refill your washer fluid frequently. Always check the washer fluid container in the engine and ensure that it is full. Make sure that you use the right combination of washer fluid and antifreeze for your weather while doing this.